Laminated Veneer Lumber LVL

AS/NZS4357 LVL BEAMS

Lengths are available in increments of 600mm from 1.8m to 6.0m (1.8m, 2.4m, 3.0m, 3.6m, 4.2m, 4.8m, 5.4m, 6.0m). Special orders may be manufactured up to 12m long.

LVL Pine wood construction beam

Form Work Beams

LVL Beams is a structural laminated veneer lumber product made from 100% renewable plantation wood resources – Radiata Pine. It has been designed and manufactured for use in construction and other similiar projects. It can be used for a variety of purposes including concrete formwork beams, joists, bearers, supports and other applications on edge only. It is strong, durable, reliable and re-usable.

Our Products:

Our products are mainly focus on Structural LVL(Laminated Veneer Lumber) which is engineered wood and designated for general structural use. LVL can be used for many structural applications, such as joists, truss,beam, frame and so on.

 

What is F11 and F17 Structural LVL?

F11 LVL or some people call E10.5 IVL can be use for framing to replace MGP 10 and more stronger and more straighter.

F17+/E14 LVL, can be use for stud, top and bottom plate, beams and lintel and so on.

 

Product Description

 Size: Thickness(35mm, 47mm, 60mm, 65mm, 77mm, 80mm)*Length(update to 6000mm)* Width(95mm, 150mm,190mm)

Materials: Full New Zealand Radiate Pine

Glue: WBP Phenolic glue

Usage: Floor Joists, Rafters, Lintels, Roof Beams, Floor Beams, concrete formwork beams, bearers, supports

Australia LVL board with Radiata pine
Size

Thickness(35mm, 47mm, 60mm, 65mm, 77mm, 80mm)*Length(update to 5900mm)*

Width(95mm, 150mm,190mm)

Materials
Full Radiate Pine
Glue
WBP Phenolic glue
Usage
Floor Joists, Rafters, Lintels, Roof Beams, Floor Beams, concrete formwork beams, bearers, supports
Moisture content
8%~12%
Feature

Strong

Lightweight & easy to handle

Engineered to perform from LVL (Laminated Veneer Lumber)

Durable – a natural resistance to chemicals

LVL SPECIFICATION:

Moisture content – 8% to 14%

Adhesive – Phenolic for maldehyde Resin adhesive

Bond-Bond quality in any single glue line of not less than 2 and average of not less than 5

Joint group-Screws, nails and bolts

Finish – Arris edge and painted surface

Branding -Each piece of LVL shows the evidence of compliance with manufacturing control standards Storage – Place on leveled ground and keep the product dry and maintain ventilation

LVL products can be preservative in H2 or H3 to against termite and refer to AS1604.4

Veneer- Sustainable sources timber and constant through the product thickness, normally using radiate for F11/E12 E13 LVL and larch for F17 LVL E14 E15 LVL

Advantages of LVL:

LVL is created with multi-layers therefore makes it stronger, straighter, durable and more uniform

Even in the extreme weather, it will be less likely to twist or shrink

LVL is most widely used over 30 years and well known as highly reliable building material

LVL is more flexible there are wide range of sizes available, more infto in the following section

Better cost control

Our LVL product is environmentally friendly, and pollution free. Our product also meets the Australian Standards, we ensure your health.

Scroll to Top